Freemotion 1020 SY, Руководство пользователя

Страница: 17 / 52

17
18
19
15
23
Wire
Ties
64
Loop
14
98
93
18. Attach the Lat Bar Bracket (15) to the Left
Upright (14) with two M10 x 68mm Bolts (98)
and two M10 Washers (93).
19. See the CABLE DIAGRAMS starting on page
41 to identify the cables.
Locate Cable B (64). Hold the ends of Cable
B near the center of the Butterfly Arm (23) as
shown.
Locate the two wire ties in the center of the
Butterfly Arm (23). Tie one wire tie to each end of
Cable B (64) as shown. Next, pull the other ends
of the wire ties until Cable B is routed through
the Butterfly Arm. Then, remove and discard the
wire ties.
Make sure to leave a loop of cable
extending from the center of the Butterfly
Arm.
See the inset drawing. Insert the ends of Cable
B (64) through the two Swivel Brackets (24).
Make sure that the ends of Cable B are under
the rods in the Swivel Brackets.
Next, press
the Swivel Brackets into the Butterfly Arm (23).
23
24 Rod
24
64