Freemotion 1020 SY, Руководство пользователя

Страница: 19 / 52

19
23
24. Route Cable B (64) around a Pulley (46).
Attach the Pulley (46) inside the bracket on the
Left Upright (14), and a Cable Trap (49) and a
Half Guard (47)
outside the bracket, with an
M10 x 45mm Hex Bolt (112) and an M10 Locknut
(84).
Make sure that the Cable Trap and the
Half Guard are oriented as shown.
Attach a Pulley (46), a Cable Trap (not
shown), and a Half Guard (not shown) to the
other side of the bracket on the Left Upright
(14) in the same way.
24
46
99
14
84
112
49
46
14
23. Route Cable B (64) over two Pulleys
(46). Then, insert the Pulleys into the Left
Upright (14).
Make sure that Cable B is not
twisted.
Attach the Pulleys (46) with an M10 x 70mm Bolt
(99) and an M10 Locknut (84).
64
47
84
46
64