Freedom9 freeGuard Slim 100, Руководство пользователя

Страница: 153 / 170

. . . . .
R O U T I N G
User Guide
10-1
Routing
10
This chapter describes the routing options available for configuration of the Freedom9 network
appliance. This chapter includes the following topics:
• Static Routes
• Setting the Default Route
• Displaying Route Information
Static Routes
An implicit or explicit route must be defined in the routing table for traffic to move between
interfaces on the appliance. The destination network, interface, and gateway define this route.
Networks that are directly attached to an interface on the Freedom9 network appliance have an
implicit route automatically created in the routing table. Networks without an implicit route
require a static route that identifies the next hop gateway and interface to forward traffic going
to the destination network.
In
Figure 10-1 , a static route is configured on the appliance to forward traffic from workstations
on the 10.0.0.0/24 network to a server on the 10.0.100.0/24 network. The static route identifies
10.0.0.100 as the gateway address for all traffic going to the 10.0.100.0/24 network.
Figure 10-1 Using a Static Route
Adding Static Routes
Use the set route command with the gateway and interface options to add a static route:
set route {ip_addr/mask} gateway {ip_addr} interface {interface name}
Example: Adding a Static Route
In the network described in Figure 10-1 , a static route is added to allow hosts on the 10.0.0.0/24
network to access a server with the IP address of 10.0.100.254: