Freedom9 freeGuard Blaze 2100, Руководство пользователя

Страница: 58 / 224

S E C U R I T Y Z O N E S A N D I N T E R F A C E S
Alternate Connection Methods
3-34
Security Appliance User Guide Version 3R2
3
Every TCP/IP connection that a host in the Trust zone makes to the
Untrust zone automatically goes through the PPPoE encapsulation
process.
[NOTE] When enabling PPPoE, the trust interface must be in NAT or
Route mode.
E X A M P L E : T O S E T I N T E R F A C E S A N D P P P o E
set interface ethernet0 zone trust
set interface ethernet0 ip 192.168.0.1/24
set interface ethernet1 zone untrust
set pppoe interface ethernet1
set pppoe username name_str password pswd_str
To test your PPPoE connection:
set pppoe enable
get pppoe
G U I E X A M P L E : T O S E T I N T E R F A C E S A N D P P P o E
1
Network > PPPoE > Edit
2
Enter the following PPPoE information and click Apply :
Type Username: name
Type Password: password
Select PPPoE enable
3
Network > Interface > Edit eth0
4
Enter the following interface information and click Apply :
Select Zone: Trust
Select Interface Mode: NAT
Type IP Address: 192.168.0.1
Type Netmask: 24
5
Network > Interface > Edit eth1
6
Enter the following interface information and click Apply :
Select Zone: Untrust