Freedom9 freeGuard Blaze 2100, Руководство пользователя

Страница: 34 / 224

S E C U R I T Y Z O N E S A N D I N T E R F A C E S
Configuring Interfaces and Subinterfaces
3-10
Security Appliance User Guide Version 3R2
3
set interface {physical interface name.vlan_id} ip
{ip_addr/mask}
[NOTE] The vlan_id must fall within the range of 1 to 4000.
Once the subinterface is created, use the set interface command to add
the subinterface to a zone:
set interface {interface name} zone {name_str}
E X A M P L E : C O N F I G U R I N G A S U B I N T E R F A C E W I T H I P A D D R E S S
A N D Z O N E
Use the set interface command to create a subinterface for the VLAN
with VLAN id 120 on the physical interface eth0. Assign the subinterface
to the trust zone with the IP address 1 92.168.100.1/24 :
set interface eth0.120 ip 192.168.100.1/24
set interface eth0.120 zone trust
save
G U I E X A M P L E : C O N F I G U R I N G A S U B I N T E R F A C E W I T H I P A D D R E S S
A N D Z O N E
1
Network > Interface > Edit (for eth0)
2
Enter the following, then click Apply :
VLAN ID: 120
IP Address/Netmask: 192.168.100.1/24
Zone Name: Trust
DELETING SUBINTERFACES
You must remove all policies bound to a subinterface before you can
delete a subinterface. After you remove all policies, use the
unset
interface command to delete the subinterface:
unset interface {interface name}
E X A M P L E : D E L E T I N G T H E S U B I N T E R F A C E E T H 0 . 1 2 0
unset interface eth0.120
save