Freecom Data Tank Gateway WLAN, Руководство пользователя

Страница: 85 / 134

5
GB
5
Data Tank Gateway in everyday use
5.1. Connecting the Data Tank Gateway WAN port to a modem
To use the internet through your Data Tank Gateway, you will need to setup the Data Tank
Gateway with the configuration information provided by your ISP. This information is described
in detail in the "Getting on the internet" section of the "Before you begin" chapter.
To configure your Data Tank Gateway with this information, you should:
• Open the Web interface window of your Data Tank Gateway.
• Log on under 'admin' and administrator password.
• Click 'Connections' on the left-hand side of the window.
• Click 'WAN' on the left-hand side.
• If the IP information is provided dynamically, check to make sure that 'Run DHCP Cli-
ent' is enabled. The configuration is complete.
• If the IP information is not provided dynamically, click the 'Run DSL Client' box.
• Enter the login data provided by your ISP.
• Click 'Apply'.
• Save your settings.
• To test the connection, start the Internet browser and see if you can access your
Internet Favorites or check the Info window under WAN on the Data Tank Gateway
configuration website to see whether your ISP has assigned you an IP address.
Note: It may take some time to establish the DSL connection to the ISP.