11
GB
2
Software installation
Uninstallation of Windows Default Driver Windows 98
1. Plug the FREECOM Cable II PCMCIA into the PCMCIA slot of your PC.
2. Open the "Device Manager" by right-clicking on the "My Computer" icon. A
menu opens. Select "Properties" and click on the "Device Manager" tab.
3. Click on the "+" next to the entry "Hard disk controllers".
4. Right-click on "Standard IDE/ESDI Hard Disk Controller" and select the delete
option.
2.3 Assigning the drive letter under Windows 95/98/ME
After successfully completing the installation of the FREECOM drive, a new drive
letter is assigned automatically (the first available letter after the internal hard
drives). This can shift the drive letter of an internal CD-ROM drive (for example, 'D'
to 'E'). If this leads to problems, it is possible to change the drive letter assignment
as follows:
1. Click on
"Start" - "Settings" - "Control Panel"
.
2. Click on
"System"
.
3. Select
"Device Manager"
and click on
"CD-ROM"
or
"Drive"
.
4. Click on the FREECOM drive, then on
"Properties" - "Settings"
. (The currently
assigned drive letter as well as the reserved drive letters will then be displayed.)
5. Under
"Reserved Drive Letter"
enter a drive letter, for example "F" for the
FREECOM device as the
"First drive letter"
and "F" again as the
"Last drive
letter"
.
6. Confirm your selection with
"OK"
. When you restart your computer, the
FREECOM drive will be assigned the letter F in
"My Computer"
.