8
FREECOM CABLE II PCMCIA / CABLE II CardBus
GB
1
Later Installation of the FREECOM HighSpeed Driver
Note: If you are not prompted to install the driver, your system has
automatically installed the Windows default driver for your FREECOM
Cable II PCMCIA.
To install the FREECOM HighSpeed driver, proceed as follows:
1. Plug the FREECOM Cable II PCMCIA into the PCMCIA slot of your PC.
2. Open the "Device Manager" by right-clicking on the "My Computer" icon. A
menu opens. Select "Properties" and click on the "Device Manager" tab.
3. Click on the "+" next to the entry "Hard disk controllers".
4. Double-click on "Standard IDE/ESDI Hard Disk Controller".
5. Open the "Driver" tab. Then click on "Update Driver".
6. The "Update Device Driver Wizard" opens. Click on "Next".
7. The Freecom driver is automatically found in the next window.
8. To start the driver update, click Finish. To finish installation, Windows asks
you to restart your computer. Confirm by clicking Yes
9. After restart your FREECOM drive appears under My Computer with new a
new drive letter. Installation is now complete
