10
FREECOM CABLE II PCMCIA / CABLE II CardBus
GB
2
Windows 98 Default Driver
No driver software is required to install the Windows default driver.
1. Plug the FREECOM Cable II PCMCIA into the PCMCIA slot of your PC.
2. The window "Hardware Installation Wizard" opens. Your FREECOM Cable II
PCMCIA is recognized as "Standard IDE/ESDI Hard Disk Controller". Confirm
with "Next" to continue the installation.
3. In the next window the option for finding the best driver for the device has
been selected. Confirm with "Next".
4. In the next window a search is performed for the new driver. Click on "Next"
to install the Windows default driver.
5. In the next window, click on "Finish" to conclude the driver installation. Your
FREECOM drive now appears with a new drive letter under "My Computer".
Later Installation of the FREECOM HighSpeed Driver Windows 98/ME
Note: If you are not prompted to install the driver, your system has
automatically installed the Windows default driver for your FREECOM
Cable II PCMCIA.
To install the FREECOM HighSpeed driver, proceed as follows:
1. Plug the FREECOM Cable II PCMCIA into the PCMCIA slot of your PC.
2. Open the "Device Manager" by right-clicking on the "My Computer" icon. A
menu opens. Select "Properties" and click on the "Device Manager" tab.
3. Click on the "+" next to the entry "Hard disk controllers".
4. Double-click on "Standard IDE/ESDI Hard Disk Controller".
5. Open the "Driver" tab. Then click on "Update Driver".
6. The "Update Device Driver Wizard" opens. Click on "Next".
7. In the next window the default is selected for finding a better driver than that
currently being used. (Recommended.) Confirm with "Next".
8. Now you can select where the FREECOM HighSpeed driver is to be installed.
Insert the FREECOM driver diskette/CD and select the floppy drive or the CD-
ROM drive. Confirm with "Next".
9. The FREECOM HighSpeed driver is then searched. Confirm the selection
afterwards with "Next". The FREECOM HighSpeed driver is now installed.
10. After completion of the installation, click on "Finish". Your FREECOM drive
appears with a new drive letter under "My Computer". The installation is then
complete.