9
GB
1
2.2 Software installation under Windows 98/ME
No special software is required to install your FREECOM Cable II PCMCIA. We
however recommend using the driver on diskette/CD that we have enclosed. This
has been specially developed by FREECOM and is faster than the Windows driver.
FREECOM HighSpeed Driver (recommended)
Note: If you are not prompted to install the driver, Windows will install
the default driver automatically. Proceed then as described in the section
on later installation of the FREECOM HighSpeed driver.
To install the FREECOM driver, insert the FREECOM installation diskette/CD in your
PC drive.
1. Plug the FREECOM Cable II PCMCIA into the PCMCIA slot of your PC.
2. The window "Hardware Installation Wizard" opens. The FREECOM Cable II
PCMCIA is recognized as "Standard IDE/ESDI Hard Disk Controller". Confirm
with "Next" to continue the installation.
3. In the next window the option for finding the best driver for the device has
been selected. Confirm with "Next".
4. In the next window a search is performed for the new driver. Select the floppy
drive or the CD-ROM drive to install the FREECOM driver. Click on "Next".
5. The driver is loaded from the diskette/CD. Click on "Next" to continue the
installation.
6. After completion of the installation, click on "Finish". Your FREECOM drive
appears with a new drive letter under "My Computer". The installation is then
complete.
Uninstalling the FREECOM HighSpeed Driver
To uninstall the FREECOM HighSpeed driver, select the file "DriverRemove.exe" on
the installation diskette/CD and follow the on-screen instructions.
Software installation
