Freddy Superminor, Руководство пользователя

Страница: 29 / 39

FPQ41 Superminor Issue 1
29
6.1.2 Weekly
Clean the tank exterior. Section 6.2.2 .
Empty the tank. Section 4.9 .
Check that the vacuum and discharge hoses are
undamaged and are not kinked. Straighten or replace the hoses as
necessary.
Check that all hose fastenings are tight and
secure. Tighten the fastenings if necessary.
6.1.3 Monthly
Empty all debris from inside the tank. Section 6.2.3
Check the lid fits tightly and securely to the
turret.
Note If the lid is not tight against the turret, the
Superminor cannot create a vacuum.
If the lid is loose, adjust the lid tension by
tightening the flat-head screw underneath
the securing clip.
If the lid is too tight and does not fasten
properly, adjust the lid tension by
loosening the flat-head screw underneath
the securing clip.
6.2 Cleaning
6.2.1 Re-usable filter
Do not re-use disposable filters (needle-
felt filters with mesh sizes of 5 to 75
micron).
Nylon filters (sizes 100 to 1000 micron) can be
cleaned and rinsed and then reused.
Dispose of the waste products in the filter in
accordance with your company procedures.
Clean and rinse the filter using a parts washer or
steam cleaner.
Check that the filter is not damaged. If it is,
replace it.
Allow the filter to dry before re-using it.