FR200 Series Vector control inverter
- 4 -
Figure 7 Operation panel diagram
3.1 Operation panel button and potentiometer function
There are 8 buttons and 1 analog potentiometer, functions of every button as table 1.
Table 1 Operation Panel Buttons Function Table
Symbol
Name
Function
Escape
Enter or exit Level I menu
Enter
Enter the menu interfaces level by level, and
confirm the parameter setting
Increment
Increase data or function code
Decrement
Decrease data or function code
Shift
Select the displayed parameters in turn in the stop
or running state, and select the digit to be modified
when modifying parameters
Multifunction
Perform function switchover (such as jog run and
quick switchover of
command source or direction) according to the
setting of F16.00
potentiometer
With the same function as AI1/AI2
Run
Start the inverter in the keypad control mode
Stop/Reset
Stop the inverter when it is in the running state and
perform the reset operation when it is in the fault
state. The functions of this key are restricted in
F16.01.
+
Key combinations
The inverter will free stop when the run and stop
key are pressed simultaneously
3.2 Quick-menu (user customized parameters) instruction
For ease of normal-used parameters quick setting, FR series inverters software
version higher than V1.07, factory menu mode changed to quick-menu (F00.01=1),
default quick parameters refer to schedule.
Display difference between quick menu and basic menu (F00.01=0) is 2
nd
grade, for
ease of user distinguish the difference and switch method as below:
Содержание FR200 Series
Страница 9: ...FR200 Series Vector control inverter 9...
