FRC Turbofoam TFC100, Руководство пользователя

Страница: 9 / 88

TFC100 Rev180215
9
GENERAL DESCRIPTION
The TurboFoam system has easy to use push button controls and highly visible displays.
Components
The system consist of the following components (Refer to Figure 1):
Control Module
Foam Pump Assembly
Manual ABF Selector (Option with TFC200 Only)
Electric ABF Selector (TFC400 Only)
Electric Flush Valve (TFC300, Option with TFC100/200)
Miscellaneous Plumbing Components
Discharge Check Valve Assembly (Option)
Discharge Flow Sensor(s) and Sensor Housing(s)
Summing Box (Required with two or more discharge flow sensors.)
TankVision Pro or Tank Float Switch (Option)
Flush Switch or Remote ON/OFF Switch and Indicator (Option)
Cables
Control Module
The control module is waterproof. All operational controls and indicators are located on the front of the
control module. (Refer to Controls and Indicators.) A USB port is accessible from the rear of the module.
Foam Pump Assembly
The foam pump assembly provides the correct amount of foam concentrate into the discharge water flow
to make a foam solution. The components of the assembly are attached to the mounting base include an electric
motor and pump, a pump control, a relief valve, and a calibration bypass valve.
Manual ABF Selector (Option)
The manual ABF selector is an option with the TFC200 models. It allows the operator to select Class
A
foam,
Class B foam, or F lushing operations by rotating the ABF selector handle. The selector is connected between the
foam tanks and the foam pump assembly intake and has an input for flush water. Two check valves are included
with this option that must be installed between the foam tanks and the selector.
Electric ABF Selector
The electric ABF selector is standard on the TFC400 models. It allows the operator to select Class A foam,
Class
B
foam, or
F
lushing operations from the push buttons on the control module. The selector is installed
between the foam tanks and the foam pump assembly intake and has an input for flush water. The electric model
is made up of three electric valves mounted on a manifold that controls the flow of foam concentrate or flush
water into the system.
On each of the valve covers there is a dial indicator to show the valve position and an Allen head screw that
allows for manual adjustment of the valve position.
The control box has two status LEDs: A - Not active; B - Blinks one time when a limit switch changes status.