Franklin Fueling Systems EVO 600, Руководство по программированию

Страница: 41 / 86

35
2-Wire Module, 3-Wire Module, Probe Module, and Sump Multiplexer.
• Module:
• Channel: Select the channel where the sensor is wired.
• Monthly Compliance: Select Yes if this sensor is to appear on the Compliance page
and in the Regulatory report.
• High Vapor Mode (if applicable): select NO for normal sensor operation; select YES if
it is desired to decrease the sensitivity (due to high vapors).
• Data Logger: Disabled by default, use under direction of FFS personnel.
Store inventory schedules
Click on "+" to add Store Inventory Schedules (if used) and complete the "Schedule Type"
and "Minutes past the hour" as applicable to your site.
Reconciliation (if option installed)
If the Reconciliation Feature is installed on your EVO™ 600 then you can select the
comparison by Sales, by Deliveries, by Tank Volume. Further, you can select the limits by
percentage and volume. Finally, Alerts may be configured to alert on various Reconciliation
differences. Complete the onscreen parameters for configuring the alerts.
Autocalibration (if option installed)
If the Autocalibration feature is installed on the EVO™ 600, then complete the parameters
to autocalibrate the tank chart based on actual product level and volume.
Compliance tracking
Enable Notifications: Yes, Allows the system to notify user about compliance warnings
and alarms.
• Assessment Time: Determines the time that the system will assess the
compliance status.
Pumps
Click on "+" to add a new submersible pump, then complete the parameters listed below:
NOTE:
For more information, see the "TS-TPI Overview and Functionality" chapter.
• Pump [#]:
• Name: Enter a name for the pump.
• Connection Type: Select how the pump is connected to the system, Relay or
Smart Controller.
• If Relay is selected complete the "Relay"; "Tank"; and "Inlet Height" parameters.
• Controller address: Input address of smart controller if using connection type
Smart Controller. If "Smart Controller" is selected complete the "Controller Type";
"Controller Address"; "Is Grouped"; "Tank" and "Inlet Height" based on your site.