Franklin Fueling Systems EVO 600, Руководство по программированию

Страница: 30 / 86

24
Settings
The following options are available under Settings:
• Preferences
• Configuration
• Tank Correction Tables
• Fueling Points (if applicable)
• Date/Time
• Printers
• Wi-Fi (if applicable)
Configuring
Configuring System ID.
Select: Settings > Configuration. Select System ID. You should have the following items ready
before beginning console programming:
• Site location information to setup Site ID. An entry in Site Name is required .
• Communications parameters for external equipment to match console settings
• Wiring diagrams of site if necessary; to identify sensor and/or probe location
• Manufacturers Tank Charts for “special” tank correction tables
• Probe stickers with gradient and RTD location for “special” probes.
To make a modification, select the parameter that you want to change. Type the new setting in
using the characters available. When finished, press enter to confirm the change. Once changes
are complete select the save button. When Confirmation is displayed, press Yes to save and apply,
or No to exit without saving—you may press cancel to continue making changes. Changes will not
be applied until you return to the main menu.
Refer to the programming tables on the following pages for a more descriptive representation of
each option including the submenus of each menu item. The console will update the menus as
additional data or information is required during programming.
NOTE:
Some features may not be available unless they were purchased with your ATG.
System ID
• Site Name: Physical name of site.
• ID Lines: These lines should contain the physical address of the site and any other
identification information required. This information will be included in the header of
reports and to identify the site.
System Configuration
• Modules Expected: Choose the number of each type of installed module in the system.
• Logging: Use logging only under the direction of FFS Technical Support.
System Preferences
• Language: Select the desired system language.