Franklin Fueling Systems EVO 600, Руководство по программированию

Страница: 40 / 86

34
• Low low (Limit/Volume/percentage) Limit: Enter the Limit/Volume/percentage
that will trigger the Low low Product alarm.
• Low limit (Limit/Volume/percentage) Limit: Enter the Limit/Volume/percentage
that will trigger the Low Product alarm.
• Enable Temperature Alarm Limits: Select yes to enable temperature alarms.
• High Product Temperature Limit: Enter the high temperature limit.
• Low Product Temperature Limit: Enter the low temperature limit.
Manifolds
NOTE:
You use this parameter only when two or more tanks are siphoned together.
• Manifold 1
• Name: Enter the name of the manifold.
• Product: Select Number of product in the manifold.
• Delivery Threshold: Enter the minimum volume increase that will trigger a delivery
to be recorded.
• Monthly Compliance: Select Yes if this manifold is to appear on the Compliance
page and in the Regulatory report.
• Members:
• Tank [#] Select tank that is part of the same manifold.
• Tank [#] Select tank that is part of the same manifold.
• Limits:
• Low low (Limit/Volume/percentage) Limit: Enter the volume that will trigger the
Low low Product alarm.
• Low limit (Limit/Volume/percentage) Limit: Enter the volume that will trigger
the Low Product alarm.
• SCALD®:
• Enable: Yes, enables SCALD® manifold testing.
• Qualify: Set the minimum required volume/level percentage of each tank in the
manifold that allows SCALD® to collect data.
• Test Confidence: SCALD® testing confidence. Choose between 90, 95, 97.5, 99 %.
Sensors
Click on "+" to add new sensors, then complete the parameters listed below:
• Name: Name the sensor. Use a descriptive naming convention to help identify the
location of the sensor.
• Sensor Number: Enter number of sensor from 1 – 500.
• Sensor Type: Select the Sensor Type.
• Connection Type: Select the module type where the sensor is wired. Options include