FRÄNKISCHE 100 DATALIGHT, Руководство по эксплуатации

Страница: 24 / 28

24 FRÄNKISCHE |
OI WLAN Access Point 100 DATALIGHT
®
Cause Action
LEDs are off
The WLAN AP is without supply voltage Switch on the supply voltage
LAN LED (orange) is off
The LAN interface has been deactivated in the “Time switch
function” (Zeitschaltfunktion) section or the LED display has been
deactivated
Activate deactivated function
WLAN LED (blue) flashes
The WLAN interface has been deactivated in the “Time switch
function” (Zeitschaltfuntkion) section or the LED display has been
deactivated
Activate deactivated function
No connection with the WLAN base station
The WLAN AP is beyond the range of the base station Reduce the distance between the devices
The WLAN function of your WLAN AP is deactivated Activate the WLAN function
Another WLAN network causes disturbances Switch to another channel or switch the channel to “auto”
The encryption of your WLAN AP has been set to “WEP”
or “unencrypted“ (unverschlüsselt)
Configure the encryption to WPA/WPA2 in the user interface
The ESSID has been set as “hidden” (unsichtbar)
To establish a WEP connection, the ESSID must be “visible” (si-
chtbar). Switch the ESSID to “visible” (sichtbar). After a connection
has been established, you can switch the ESSID back to “hidden”
(nicht sichtbar)
The WLAN AP and the PC use different encryption methods Configure the same encryption method at the PC and the WLAN AP
No WLAN connection with the PC
The WLAN adaptor of the PC is not ready for operation
Check whether the WLAN adaptor is switched on; some devices
have a physical switch for this
The PC is beyond the range of the WLAN AP Reduce the distance between the PC and the WLAN AP
The WLAN AP and the PC use different encryption methods Configure the same encryption method at the PC and the WLAN AP
No access to devices in the network possible
The device has a firewall Grant network access to the firewall
Wrong address range/wrong subnet mask Check if the addresses have been configured correctly
The WLAN AP cannot be found under the IP address
You have activated the DHCP client Try to find the device using the WLAN function
The plain text view for password and key does not work
You are using Internet Explorer 9
Remove all activations in the compatibility view (Kompatibilität-
sansicht) under Extras/Settings (Extras/Einstellungen)
The diagrams are not displayed
You are using Internet Explorer 7 or 8
Install a SVG plugin (e.g., by Adobe at
http://www.chip.de/downloads/Adobe-SVG-Viewer_15272819.html)
You are using Internet Explorer 9
Remove all activations in the compatibility view (Kompatibilität-
sansicht) under Extras/Settings (Extras/Einstellungen)
4 Help with malfunctions