FRÄNKISCHE 100 DATALIGHT, Руководство по эксплуатации

Страница: 16 / 28

16 FRÄNKISCHE |
OI WLAN Access Point 100 DATALIGHT
®
3.5.3 System reboot
A reboot achieves the following:
Adoption of the actions carried out
under software update (see page 15).
3.5.4 Log-out
Exit the user interface of the WLAN AP
using the “Logout” (Abmelden) tab.
Save you configurations beforehand. To
make more changes (at a later point in
time), you will need to log in with your
password again.
3.6.1 Reset variants
A reset restores the WLAN AP to factory
settings (see page 17). A reset can be
carried out as follows:
n
via web browser
(see 3.5.3)
n
by means of bridging at the device
(for older versions, see page 17)
n
by means of a reset magnet
New device variants
From versions 2.x, you can either per-
form a reboot or load the factory set-
tings via the multi-pin connector socket
or via the reed contact – depending on
how long the contact is actuated.
Resetting
n
Short-circuit the multi-pin connector
socket or actuate the reed contact for
more than 2 seconds and less than 5
seconds.
The start of the reset is confirmed
with a flashing WLAN LED (see page 17).
Loading factory settings
n
Short-circuit the multi-pin connector
socket or actuate the reed contact for
more than 5 seconds and less than 10
seconds.
The start of the reset is confirmed
with a flashing LAN LED.
3.6 Reset
3 Configuration