10
10/17 |
036865-047
STEP 2:
Disconnect tubing from the elbow on the valve.
(Figure 4)
STEP 3:
Using the 38" piece of tubing provided, cut off 6" and install it on the end of the TEE. Install the remaining tubing onto the branch of the TEE.
Connect the other end of the TEE to the tank outlet tubing (tube that was disconnected from the elbow).
(Figure 5)
STEP 4:
Route the TEE and tubing under the waste drain and connect the 6" length to the water valve elbow.
(Figure 6)
Figure 4
24" TUBING
6" TUBING
TEE
Figure 5
Figure 6
WATER
VALVE
ELBOW
Go to Step 5 “Final steps”
SECTION 3: INSTALLATION
B. CONNECTING THE WATER LINE (continued)