![background image](http://html1.mh-extra.com/html/franke/kep-ac-ebf-snd-series/kep-ac-ebf-snd-series_installation-manual_2328110007.webp)
7
10/17 |
036865-047
SECTION 3: INSTALLATION
B. CONNECTING THE WATER LINE
¼" OD tube to connect
to Bottle Filler
a) First, remove plug from fitting on tank drain.
b) Next, insert end of tube into fitting.
CONNECT THE BOTTLE FILLER TUBE
For the single Bottle Filler ready cooler, the tube to connect to the filler is found
inside the access panel (the compressor compartment). This tube supplies cold
water from the cooling tank to the Bottle Filler.
If you are retrofitting the bottle filler to an existing cooler, follow the instructions starting on the next page
FOR SPLIT LEVEL BOTTLE FILLER READY COOLERS:
The tube to connect to the filler is packaged in the "dummy" unit.
Remove tube from bag