![background image](http://html1.mh-extra.com/html/franke/fixg903b1/fixg903b1_operation-manual_2327147025.webp)
25
COOKING ADVICE
MAINTENANCE AND CLEANING
WHAT TO DO IN CASE OF A PROBLEM
EXAMPLES OF COOKING POWER SETTING
The values below are indicative
1 to 2
Melting, reheating
The heating zone is activated
2 to 3
Simmering, defrosting
Selection of the cooking level
3 to 4
Steam
No pan or inadequate pan
4 to 5
Water
Automatic cooking
6 to 7
Medium cooking, simmering
Electronic failure
7 to 8
Cooking
The heating zone is hot
9
Frying, roasting, boiling water
The Boost is activated
Switch-off the appliance before cleaning.
Do not clean the cooktop if the glass is too hot because there is a risk of burn.
•
Remove light marks with a damp cloth with washing up liquid diluted in a little water. Then rinse with cold water and dry the surface
thoroughly.
•
Highly corrosive or abrasive detergents and cleaning equipment likely to cause scratches must absolutely be avoided.
•
Do not ever use any steam-cleaner or pressure washer.
•
Do not use any object that may scratch the ceramic glass.
•
Ensure that the pan is dry and clean. Ensure that there are no grains of dust on your ceramic cooktop or on the pan. Sliding rough
saucepans will scratch the surface.
•
Spillages of sugar, jam, jelly, etc. must be removed immediately. This will prevent the surface being damaged.
•
Do not use a steam cleaner to clean the appliance.
The cooktop or the cooking zone doesn’t start up:
•
The cooktop is badly connected on the electrical network.
•
The protection fuse cut-off.
•
The locking function is activated.
•
The sensitive keys are covered with grease or water.
•
An object is put on a key.
The control panel displays [ U ]:
•
There is no pan on the cooking zone.
•
The pan is not compatible with induction.
•
The bottom diameter of the pan is too small.
The control panel displays [ E ]:
•
The electronic system is defective.
•
Disconnect and replug the cooktop.