![background image](http://html1.mh-extra.com/html/franke/fixg903b1/fixg903b1_operation-manual_2327147022.webp)
22
AUTOMATIC COOKING
All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at full power for a certain time, and will then
reduce automatically the power on the pre-selected level.
Start up:
Action
Control panel
Display
Power level selection
slide on the “SLIDER” to [ 7 ] [ 7 ] is blinking with [ A ]
(for example << 7 >>)
and hold 3s
Switching off the automatic cooking:
Action
Control panel
Display
Power level selection
slide on the “SLIDER”
[ 0 ] to [ 9 ]
Stop&Go function:
This function stops all the cooktop’s cooking temporarily and then allows restarting with the same settings.
Star up/stop the pause function:
Action
Control panel
Display
Engage pause
press [ II ]
[ II ] and control light on
Stop the pause
press [ II ]
“Slider” animated
Press on the animated “slider”
previous settings
RECALL FUNCTION
After switching off the cooktop [ 0/I ], it is possible to recall the last settings.
•
cooking stages of all cooking zones (Booster)
•
minutes and seconds of programmed cooking zone-related timers
•
Keep warm function
The recall procedure is following:
•
Press the key [ 0/I ]
•
Then press [ II ] before the light stops blinking.
The previous settings are again active.
<< KEEP WARM >> FUNCTION
This function allows liquids to reach and maintain automatically a temperature of 42°C or 70°C. This will avoid liquids overflowing and fast
burning the bottom of the pan.
To engage, to start the function << Keep warm >>:
Action
Control panel
Display
42
°
C to engage
press once on key [ ]
[ U ] and [ ]
70
°
C to engage
press twice on key [ ]
[ U ] and [ ]
94
°
C to engage
press 3 times on key [ ]
[ U ] and [ ]
To stop
slide on the “SLIDER”
[ 0 ] to [ 9 ]
or press key [ ] until [ 0 ]
[ 0 ]
The maximum duration on keep warm is 2 hours.