1T 310'177 Operating Manual
Ecolino
Erstellt: 01.05.2002 Rev.: C SL: 20'987 BJC
page 42
6.1.6.2 Load Chip Cards
1. Insert the Load Card into the card reader
2. Press the "+" or "-" key until the parameter is obtained
load chip cards
perform "shift"
3. Press the Shift key
remove card
The Load Card must be removed
insert card
cash/load à
4. Insert the Cash Card into the card reader
credit
XX.XX
load sum 00.00
5. Using the "+" key, adjust the loaded amount by the
credit
XX.XX
loading factor programmed by the service engineer
load sum
10.00
6. Press the Shift key to load this amount onto the
credit
XX.XX
Cash Card
...save...
credit
10.00
...done...
credit
10.00
load sum
00.00
7. Remove the Cash Card
remove card
8. If further Cash Cards are to be loaded, steps 4 to 7
insert card
must be repeated.
cash/load à
9. Insert the Load Card into the card reader
load chip cards
perform "shift"
6.1.6.3 Clear Chip Cards
The credit on the Cash Card is cleared.
1. Insert the Load Card into the card reader
2. Press the "+" or "-" key until the parameter is obtained
delete chip cards
perform "shift"
3. Press the Shift key
remove card
The Load Card must be removed
insert card
cash/load à