![background image](http://html1.mh-extra.com/html/franke/ecolino/ecolino_operating-manual_2327061021.webp)
1T 310'177 Operating Manual
Ecolino
Erstellt: 01.05.2002 Rev.: C SL: 20'987 BJC
page 21
5. Remove frother head and dismantle (Figures 6 and 8).
6. Clean all parts of the frother head using a mild cleaning agent in water at about 50°C.
IT IS ESSENTIAL TO USE BRUSHES FOR HOLES
(Figures 9-12). Rinse all parts with
fresh water.
7. Assemble frother head.
8. Mount frother head (Figure 13).
9. Mount coffee outflow again (Figure 14).
3.5.2b Manual cleaning of the throttle valve (CF2 only)
The throttle valve must be cleaned daily. To do this, pull it off the milk tube. Clean the individual parts
using the brush set supplied and/or place the parts overnight in a little cleaning solution. Rinse the
parts thoroughly with fresh water and reassemble the valve. (Note the assembly direction of the valve
body with pressure spring.)
Now push it back onto the milk suction tube and ensure that the valve is completely in the milk.
Figure 1
Figure 2
Figure 3 Figure 4
1. Remove the milk container and place the remaining milk in a refrigerator until required for further
use (Figure 1).
2. Clean the milk container. Now introduce 3 caps of cleaning agent in the container (Figure 2).
3. Now fill the milk container with 1 litre of cold water (Figure 3).
4. Place the container in the refrigerator, place the milk tube in the container and close the door
(Figure 4).
3.5.2c
Automatic cleaning programme for coffee machine
with
Cappuccinatore option
CF1 / CF2