Frank FH 1021 TS Скачать руководство пользователя страница 24

24

3.2.2  Water and chemical systems

The incoming water from the main water supply flows past the float valve into the water inlet 

tank. The water is then pumped by the high-pressure pump through the water heater and 

supplied under pressure to the safety spray lance. The flat jet nozzle of the spray lance cre-

ates a powerful fan-shaped high-pressure jet. Cleaning agents can be added via a dosing 

valve.

3.2.3  Safety spray lance with mechanical spray gun

The mechanical spray gun permits operation of the unit only when the safety control lever 

is operated. Actuating the lever will open the spray gun. When the lever is released the 

spray gun is closed, thus preventing further water emerging from the spray lance. Closing 

the spray gun during the operation will result in a delayed machine shutdown via a pressure 

switch. Actuating the gun lever again will restart the machine via the pressure switch.

The spray gun is a safety device. Replacements and repairs may only be carried 

out  by  qualified  presonnel.  In  case  of  replacement,  only  parts  authorized  by  the 

manufacturer may be used.

3.2.4  Burner delay element

The electronic time delay element within the switch box causes the delayed starting of the oil 

burner. The time delay is approx. 4 seconds. The delayed opening of the oil burner solenoid 

valve prevents ignition from taking place in the event of air starvation which could cause 

smoking.

3.2.5  Protective ON/OFF motor switch

Actuating the motor switch will start or stop the machine. The motor switch has been de-

signed as a protective motor switch and protects the high-pressure pump drive motor agianst 

overload. In case of overload conditions, the entire machine will be cut out automatically.

3.2.6  Overflow safety valve

The overflow safety valve protects the high-pressure pump from excessive high pressure 

and has been designed in a way that it cannot be set above the maximum permissible 

operating pressure. By operating the handwheel different operating stages can be set. The 

limiting nuts on the handwheels have been paint-sealed.

Replacements and repairs may only be carried out by qualified personnel. In case of 

replacement, only parts authorized by the manufacturer may be used.

3.2.7  No return valve

The no return valve within the housing of the flow control safety valve prevents the reverse 

flow of hot water from the heating coil as well as the pressure from falling when the spray 

gun is closed.

Содержание FH 1021 TS













































Отзывы: