FRANCO KF53, Руководство пользователя

Страница: 20 / 52

20 KF_U210700
IT EN
6.2 UN-ASSEMBLED PARTS
NOTE
The following operations are performed only before
installation of the circulator.
1. In the case of preassembled machine, remove the cable cover
(pos. 14) from the envelope of the User Instructions Manual
and insert it manually in the hole on the side panel as shown
in figure.
2. Remove the safety netting, air inlet side, by loosening the
screws present on the net fastening devices (pos. 15).
Fixing the suspention hook as shown
in figure.
3. Pass the motor cable in the previously installed cable cover
(pos. 14).
NOTE
Make sure, at the end of the procedure, you have completely
removed the motor cable from the circulator and that it is
intact and free of cuts and/or deformations.
4. Relocate the safety netting and tighten the screws.
5. With the motor cable extracted and the safety netting fixed,
proceed with the installation of the circulator at the wall or frame.
Locking
Torque
25 Nm