Framery Q Working with PAL, Руководство по установке

Страница: 35 / 106

8.
Measure the straightness of the hinge-side glass frame with a spirit level. Adjust if
needed and install with M8x20 screws (2 pcs) and M8 washers (2 pcs). Use a hex key.
7.3 Install the upper and lower frames
1.
Install guide pins (4 pcs) to the holes on the front of the roof.
Note: Make sure that the flat side of the guide pin goes into the mounting hole.
2.
Install the upper frame with M8x60 bolts (2 pcs) and M8 washers (2 pcs) at the small
openings and with one M8x35 bolt and M8 washer at the center opening.
Framery Q Working with PAL Installation instructions
info@frameryacoustics.com
35