Framers Corner M3, Руководство оператора

Страница: 8 / 19

Pull back the nylon cord and hook the looped
end over the anchor bolt.
Insert a strip of wedges, sharpened side up-
wards. When using genuine Framers Corner
Wedges, insert with glued side up.
Unhook the nylon cord and gently let the spring
push the strip of wedges into the magazine.
Use visual observation to confirm that the
wedges slide under the cap with a gap of no
more than 0.5mm.
Page 8
To remove wedges from the magazine, reverse
the proceedure.
Use the Magnetic Tool (T) to pull the partly used
strip of wedges, out of the magazine.
5) Set the Front Clamp
The front clamp grips the moulding by the
rebate. The clamp holds the moulding securely
even when moving from one wedge position to
another. Place a piece of the moulding to be
used against the fence. Press and hold down
the right hand footpedal. The clamp pusher will
travel backwards.
Fit the clamp over the clamp pusher, in such a
way that tip of the clamp is within 15mm of the
moulding.
Release the foot pedal and the clamp will
move forward, gripping the moulding.
The tip of the clamp is desgined to allow
for slight variations in the moulding width.
0.5mm
Gap
Only
15mm