Framers Corner M3, Руководство оператора

Страница: 5 / 19

Place the Brass Nipple (S) into the threaded
hole in the fence block.
Screw in the Locking Handle (R).
3) Assemble the Top Clamp
Fit the Clamp Adjuster (B) onto the bridge and
secure in place with Washer (E) and Handle
(D).
Page 5
Push the adjusting button inwards and insert,
from above, the Vertical Bar (C).
Screw the L Shaped Pad (F) onto the end of the
vertical bar.
4) Assemble the Front Clamp
Position the Front Clamp (L) so that one of the
round holes aligns over the Clamp Pusher.
5) Assemble the Side Tables
Use 8 Cap Head Bolts (O) and Washers (P) to
fit the 2 Side Tables (H&J).
Use a straight edge to set the level of the tables
flush with the main table.
Clamp
Pusher