Framers Corner M3, Руководство оператора

Страница: 7 / 19

When inserting 2 or more wedges into a corner
the first position should be 1/4 distance from the
front edge. The last position should be 1/3rd
distance from the back edge.
There is also a lock to hold the current
position. This is used when ‘stacking’
wedges. Stacking is the process of
inserting multiple wedges in the same
position. The second, and subsequent
wedges, will drive the first wedge deeper
creating a stack.
Using this method 2 x10mm high wedges
will become a 20mm high wedge.
3) Select the Appropriate Sized Wedge
The M3 can use wedge (V-nail) sizes
7mm, 10mm, 12mm and 15mm.
Please Note: Only use
Genuine Framers Corner Universal wedges
10.3mm Width, supplied in glued strips.
Page 7
The warranty will be void if the wrong type
Wedges are use.
There must be a mimumum of 2mm between
the top of the inserted wedge and the face of
the moulding.
4) Load the Magazine
Adjust the height of the wedge magazine using
the round knob located underneath the
magazine.
L
1/4 L
1/3 L
Single
Wedge Stacked
Wedges
2mm
Minimum