12
• The evaporating tray and water drain hole (back of the refrigerator crisper
shelf) should be cleaned
periodically to prevent the water from collecting on the bottom of the fridge instead of flowing out.
• You can also clean the drain hole by pouring 1/2 glass of water down it.
Defrosting the freezer compartment
The frost, accumulated in the freezer compartment, should be removed periodically (Use the plastic scraper
provided). The freezer compartment should be cleaned in the same way as the refrigerator compartment,
with the defrost function of the compartment at least twice a year.
For this:
• The day before you defrost, set the thermostat dial to “5” position to freeze the food completely.
• During defrosting, frozen food should be wrapped in several layers of paper and kept in a cool place. The
inevitable rise in temperature will shorten its storage life. Remember to use this food within a relatively short
period of time.
• Set the thermostat knob to position “•” or unplug the unit. Leave the door open until the unit is completely
defrosted.
• To accelerate the
defrosting process, one or more bowls of warm water can be placed in the freezer
compartment.
• Dry the inside of the unit carefully and set the thermostat knob to the MAX position.
Replacing LED lighting
If your refrigerator has LED lighting contact the help desk as this should be changed by authorized personnel
only.
Transportation and changing of installation position
• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secure
d with a wide string or a strong rope. The instructions
written on the corrugated box must be followed while transporting.
• Before transporting or changing the installation position, all the moving objects (ie, shelves, crisper…)
should be taken out or fixed with bands in order to prevent them from getting damaged.
Carry the fridge in the upright position.
Repositioning the door
• It is not possible to change the opening direction of your refrigerator door, if the door handle on your
refrigerator is installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any handles.
• If the door opening direction of your refrigerator may be changed, you should contact the nearest
Authorised Service Agent to have the opening direction changed.
If the your refrigerator is not working properly, it may be a minor problem, therefore to save time and money,
check the following, before calling an electrician.
What to do if your appliance does not operate
Check that:
• There is no power
• The general switch in your home is disconnected
• The thermostat setting is on the «•» position
• The socket is not faulty. To check this, plug the appliance in to another socket which you know i
s working.
9.
TROUBLESHOOTING
