FSW100-03 Multilanguage 04/11/2014
46
FSW 100
POWER SAVINGS
To reduce power consumption, take care of following suggestions :
DISPOSAL OF THE UNIT AT END OF ITS LIFE
Once the unit is arrived at the end of its life and needs to be removed or replaced, the following
operations are recommended:
These operations allow easy material recovery and recycling process, reducing environmental
impact.
It is recommended to follow the pertinent norms in the disposal of the wasted materials.
TROUBLE SHOOTING
In the following pages are reported the most common troubles that can cause the unit to stop or
to operate in an uncorrect way.
UNIT UNDER ALARM
When red light is lit up, the unit is stopped and set under alarm condition.
Make sure that room in which unit should operate has doors and windows firmly
closed;
Set the humidity control switch to the proper value: lower set values than necessary
(even few points) may cause great capacity loss with consequently longer operating
periods: it is advisable to set humidity values below 60% only if strictly necessary.
For the machine which has a second condenser (monoblock or split system) check every
month if the heat exchanger is clean and free from room dust, and check the efficiency
of the motorfan.
The unit refrigerant has to be recovered by trained people and sent to proper
collecting centre;
Compressor lubricating oil has to be recovered and sent to proper collecting centre;
the frame and various components, if no longer usable , have to be dismantled and
subdivided according to their nature; in particular, copper and aluminium, which are
present in conspicuous quantity in the unit.
Concerning the solutions, it is necessary to take an extreme care on the actions to
adopt: an excessive confidence may cause serious accidents to inexperienced people.
It is advisable, once the cause is detected, to contact our servicing people or trained
people only.
