FSW100-03 Multilanguage 04/11/2014
36
FSW 100
CONTROL AND SAFETY DEVICES
CONTROL DEVICES
All the control devices are tested on factory before the unit is delivered.
Their operating mode is described in the following paragraphs.
HUMIDITY CONTROL SWITCH
Humidity control switch enables or disables unit operation depending on the humidity value desired.
To verify its correct operation, set the humidity desired value close to lower limit. At this point verify
that fan and compressor (after a time delay) will be started in sequence. Verify as well that the unit is
stopped when humidity set is reached.
INSPECTION, TRANSPORT AND SITE HANDLING
INSPECTION
After receiving the unit, immediately check its integrity. The unit left the factory in perfect condition;
any eventual damage must be questioned to the carrier and recorded on the Delivery Note before it
is signed. Our firm must be informed, within 8 days, of the extent of the damage.
The Customer must prepare a written statement of any severe damage
.
LIFTING AND SITE HANDLING
The lifting is obtained by using a forklift: fork must be inserted in the base pallet, and care must be
taken in order that the fork does not hit the section base or panel (see the picture below).
To unload the unit with a crane, pass bars under the machine and attach the necessary cable or chain
lifting devices to the bar, ensuring that they are clamped firmly; protect the sides of the chiller with
boarding or material of a similar nature.
UNPACKING
When unpacking the unit pay attention not to damage the unit.
The package is made up by different materials: wood, paper, nylon etc.
It’s a good rule to keep them separately and deliver to the proper collecting centre in order to reduce
their environmental impact.
The machine must not be set running in narrow areas, which do not allow a
proper diffusion in the room of the air coming out from the grille. It is, instead,
allowed to set the machine on the sides near the walls.
The front panel should not be used to lay over it cloths or other things: it could
cause damages or dangers.
