Doc Q7.0
37
X-Y / Y-X Copying
You can copy all of the settings from X to Y, or Y to X, by double tapping the button for the one you want to copy
to,
and then pressing
to confirm. So, to copy X to Y, double-tap and then press
. If you accidentally
double tap when you don’t want to copy, press
to cancel.
X/Y Quick Jump
4.4.1
The X and Y buttons also double as user-definable Quick-Jump keys. These allow quick access to the EDIT menus of
your two favorite blocks from almost any screen without needing to “drill down” through the grid. You might, for
instance, set “X” to jump to
AMP1
, while “Y” might be assigned to bring up the
PHASER1
menu.
Quick-Jump is disabled if you are already in the EDIT menu of another block (including Global Blocks or Modifier
sub menus), or if you are in the process of SAVING (where X and Y are used for quick character entry).
Quick Jump settings are assigned in the X/Y page of the I/O menu, detailed on p.
Bypassing a Block
4.5
Can you imagine a stompbox that can’t be stomped? Neither can we.
Any effect
3
on the Axe-Fx II can be bypassed (or engaged) in three different ways:
1.
Press the front panel
button while the block is either selected in the grid or open to edit.
Note that accidentally double tapping or holding FX BYP will enter the Global Blocks menu instead
(see p.
). Press
and try again if this happens.
2.
) attached to the block’s
BYPASS MODE
parameter.
4
3.
By remote control via the block’s global remote bypass function, which may be set to “PEDAL” or to any
MIDI CC# on the CTRL page of the I/O menu (p.
)
A bypassed block is shown on the grid with a dotted outline.
When you bypass any block, one of several things can actually happen depending on how its
BYPASS MODE
parameter is set. For more on this, see the section on
beginning on p.
Every SCENE stores the bypass state for every block in a preset. See section
Loading Effects from another Preset
4.6
The
Recall Effect
function makes it possible to load block settings directly from one preset to another. To perform
this operation, select the EFFECT tab of the RECALL menu using the
buttons. Select the preset and block that
you want to load
from
and press
. “EFFECT RETRIEVED!” will be displayed, and the “local” block (whether or
not it is already on the grid in the current preset) will be updated with all settings from the “retrieved” block. All
settings for both X and Y are recalled for those effects that support X/Y. Modifiers (p. 136) are also recalled. If the
block you are trying to load is not found in the preset you try to load it from, “EFFECT NOT FOUND” will be shown
instead. Note that you can also recall NOISE GATE, MAIN OUT, and CONTROLLER (LFO1, LFO2, etc.) settings.
2
As noted in the section which covers I/O parameters, X is in fact the “ON” state for these CC switches (64-127) and Y is the OFF (0-63).
3
The MIXER, FB SEND, and SHUNT blocks have no bypass functions.
4
The ENHANCER has no
BYPASS MODE
parameter.
