FPM Agromehanika 627 678 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 62

FPM Agromehanika 627 678 Скачать руководство пользователя страница 6

S A F E T Y

Most  accidents  occur  during  work,  maintenance,  or  transport  due  to  non-observance  of  the
fundamental safety requirements. This is why you are the most important person for operating and
maintaining your mower. Regardless of whether you are working alone, with your family members,
or  with  other  persons,  always  read  and  observe  the  basic  method  of  operation.  Additionally,
warning  labels  are  affixed  to  the  mower  that  serves  as  a  reminder  to  always  observe  safety
practices.

-

The indicated operation, maintenance and safety instructions must be strictly observed

at all times in order to ensure safe and secure mower operation.

- Before beginning work, the operator must be aware of the functioning principle of all of the

mower components. It may be too late for that during work. First and foremost, learn how
to disconnect the mower quickly and safely in case of emergency.

- The operation and maintenance manual must be kept for the entire service life of the

machine.

- Metal nameplate must always be legible, visible and clean.

- When attaching or detaching the mower to or from the tractor, always put the support foot

in the appropriate position (safety).

- Be especially careful when attaching or detaching the mower to or from the tractor; the

area around

the lifting device is dangerous.

- Check the tractor front wheels for damages prior to operation. Attach weights to the

provided place.

- Observe the maximum permissible axle load and total weight. Due to the added weight,

the load is redistributed on the wheel axles.

- Use a cab tractor for road safety requirements. Keep all windows closed during operation.

- Prior to starting the mower, even for a very short distance, always bring it in its transport

position. Observe the permissible overall dimensions for transport.

- Prior to driving on public roads, secure the mower for safe transport

and observe the road traffic regulations.

In special circumstances, use lights to signal danger, if not contrary to traffic regulations.

- Never transport others on the mower or the tractor during work or transport.

- Never transport an unsecured mower.

- Never transport an operating mower.

- Never turn on the connection shaft when the mower is in the transport position.

- Never leave the driver’s seat when the tractor operates.

- Every time before using the mower check whether all parts (nuts, screws, etc.) are
sufficiently tightened,

and secure the discs and cutters.

-

If worn out or damaged, cutters, discs and their fasteners (nuts, screws, etc.) must be

replaced with FPM AGROMEHANIKA d.o.o BOLJEVAC original parts.

Page 6

«
...
4
5
6
7
8
...
»

Содержание 627 678































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды