FPM Agromehanika 627 678, Сборка / Эксплуатация / Техническое обслуживание, Список запасных частей

Страница: 22 / 62

ROTARY MOWER TRANSPORT
FPM Boljevac
Page 22
For transporting the mower on public roads
or from one field to another, remember and
do the following:
1. Switch off the tractor output shaft and
wait until all moving parts have come to a
stop.
2. Raise the mower to the height required
for transport using the hydraulic, remove
the lock (A; Fig. 36) and turn the support
foot (B) upward, than secure it with the
lock (A) again to prepare the mower for
transport.
3. Reposition the locking pin (A; Fig. 37) on
the floating rod in the transport position
(see label drawing B), and secure it with
the lock to prevent the rod from floating.
4. Fold the front end of the canvas
cover (A) backwards (see arrow), Fig.
38,
and fasten it using the provided
straps in
this position.
5. Raise the cutting unit using the
hydraulic cylinder in the transport
(vertical) position.
6. Lower the drawbar from the neutral
position, connect it (T) with the
support frame and secure it with a
lock (L: Fig. 39) to prepare the
mower for transport.
ATTENTION: PRIOR TO
TRANSPORTING THE ROTARY
MOWER, ENSURE THAT THE MOWER
IS SECURED FOR TRANSPORT AND
THAT ROAD SAFETY REGULATIONS
ARE COMPLIED WITH.
When transporting the
rotary mower, the drawbar
(T; Fig. 39) must be in the
attached in order to ensure
safe and secure transport.
ATTENTION:
36 A