FPI FP90 Wood Fireplace
35
MAINTENANCE
PLATED FINISHES
The optional plated fi nishes on the louvers and
surrounds requires little maintenance and needs
only to be cleaned with a damp cloth.
DO NOT
use abrasive materials or chemical cleaners, as
they may harm the fi nish and void the warranty.
Keep doors and louvers off during construction
to avoid damage.
DOOR GASKET
If the door gasket requires replacement, you
must use 5/8" (16mm) diameter oval, medium
density material, 34" (864mm) long for each side.
A proper high temperature gasket adhesive is
required. Contact your dealer for the Regency
Gasket Repair Kit.
DOOR HINGES
Grease door hinges with high temperature
grease regularly for smooth operation and to
avoid squeaks.
CHIMNEY CLEANING
Do not permit any creosote or soot build-up in
the chimney system. If you detect any build-up
contact a qualifi ed chimney sweep or clean it
yourself. Perform the following steps:
a.
Remove the fi rst secondary air tube and
baffl es.
b. Remove the termination cap by removing
the screws and lifting.
c. Make sure fi replace doors are shut to
prevent soot and dirt from entering the
loom.
d. Clean chimney with either nylon or steel
brush.
e. Replace chimney cap.
f. Re-install baffles and secondary
tubes.
MAINTENANCE
GLASS CLEANING
Only clean your glass window when it is
cool. Your local retailer can supply you with
a recommended glass cleaner if plain water
and a soft cloth does not remove all deposits.
Do not use oven cleaner on the glass as it will
etch the glass.
Do not use any type of abrasive cleaner to
clean glass.
GLASS REMOVAL /
REPLACEMENT
Allow the stove to cool before removing or
replacing glass. Remove the door from the
fi replace and remove the glass retainer. Use
caution when removing broken glass to avoid
injury. When placing the replacement glass in
the door, make sure that the glass gasketing
will properly seal your unit. Replace the retainer
and tighten securely, but do not wrench down
on the glass as this may cause breakage. Do
not substitute materials. If your glass door
breaks, do not use your unit until it has been
replaced.
