FPG IN-5C08-OF, Руководство по эксплуатации продукта

Страница: 16 / 44

Part No. 26126 Rev. P September 2019
- 16 - 5000 Series Open Front Cabinets
Interior
REFRIGERATED CABINETS
-
CLEANING
Internal Glass The internal glass surfaces can normally be cleaned after the shelf trays have
been removed.
The shelf lights are connected with plugs and sockets, enabling the complete
shelf assemblies to be removed.
Only remove the lights, shelf brackets and rails when carrying out longer term
maintenance.
Trays, Shelves
& Air Grills
Stainless steel trays, shelves, grills etc. should be cleaned with hot soapy water.
Do not use abrasive pads or cleaners as these may damage surfaces.
Warning: Dishwasher detergents will damage any anodised aluminium parts.
Access to the
Cabinet Base
Cavity
Remove the front ticketing rail from the
deck trays, if fitted.
Lift out the deck trays and sweep out, or
use a vacuum cleaner, to remove any
loose debris.
After removing two screws, the fan deck can be
lifted, to enable thorough cleaning.
Lift the cover plate off the
evaporator coil, raising it
to the vertical position, to
disengage it from the
chassis.
Lift the air louvers out.
Caution
The whole of the cabinet interior is now accessible
for cleaning.
To avoid possible damage when replacing fan decks,
be sure that cables are not trapped by metal parts.
Continued on next page