NT500 VAG Scanner User’s Guide_English Version_V1.00
34
4.
To save the new value, press
Yes
to confirm. Or press
No
to abort and return.
5.
To reset all adaptation values to their original factory defaults, input channel 000, and press the
function key
Ch.00 Resets
.
Figure 4-51 Sample CH.00 Resets Screen
6.
Answer
Yes
to confirm the request or answer
No
to abort and return.
Figure 4-52 Sample CH NO.0 Screen
4.1.3.12 Readiness Test
Readiness Test menu allows to view if the monitored emissions "systems" in an OBD-II car have
been checked and have passed the on-board tests.
Whenever you clear DTCs, all “systems” will be set to "Fail" or "Failed or Incomplete". Most cars
do not have all 8 systems, so the ECU should recognize the systems that are not actually in the
car. These will come up "Passed" automatically without going through any tests.
NOTE
The Readiness function is only available on Engine Controllers that are OBD-II compliant (all
1996 and newer US-Model) or EOBD compliant (all 2001 and newer European-market models).
Non-US models and older TDIs may not support the Readiness function even though they are
otherwise OBD-II compliant. OBD-I did not require any "monitors".
To view readiness status of the vehicle under test:
1.
Select
Readiness Test
from Function Menu and press the
ENTER
key.
