NT500 VAG Scanner User’s Guide_English Version_V1.00
15
4.1.2.1 Auto Scan
Auto Scan performs an automatic system test to determine which control modules are installed on
the vehicle and obtain diagnostic trouble codes (DTCs) overview. Depending on the number of
control modules, it may take 10 minutes or longer to complete the test. However, if you have used
the Models (Guide Function) to identify the vehicle, it takes much shorter time to determine the
installed controllers.
To perform an automatic system scan:
1.
Scroll with the arrow keys to highlight
Auto Scan
from the menu and press
ENTER
to start.
Figure4-9 Sample Selected System Scan Screen
2.
To pause the scan, press the function key corresponding with
Pause
on the screen.
Figure 4-10 Sample Automatic System Scan Screen
3.
At the end of successful automatic controller scan, a menu with a list of installed controllers
together with their DTC overview displays.
Figure 4-11 Sample Auto Scan Screen
