- 14 -
5. With 7.4-12v DC power input, LINK indicator will flicker. That means the successful
connection of transmitter and remote control.
6. If you are using a dual S-Bus receiver, both S-Bus1 and S-Bus2 output CH1 to CH16
from the remote control. And the output of S-Bus1 and S-Bus 2 can be mapped
separately. Pls refer to the output mapping description.
By default, the S-BUS1 and S-BUS2 interfaces output the CH1 to CH16 of the
remote control to 1-16 channels.
5. T30S Second Display Instruction
1. Before powering on the T30S, connect the HDMI and USB ports of the main display to
the HDMI and Type-c ports of the secondary screen respectively.
2. After successful connection of the Type-c port to the secondary screen, the split-
screen and touch function can be realized, but if you plug in the 5V port, the touch
function of the secondary screen cannot be enabled.
5.1. Touch calibration on the secondary screen
If the touch is insensitive for the first use, it is needed to do calibration as the below
procedures.
1. Open the Control Panel, find
‘
Tablet Settings
’
in the Control Panel.
2. Click
‘
Settings
’
in the
‘
Configuration
’
column in the tablet settings (an external
keyboard is needed).
3. As shown below, follow the computer's instructions.
