background image

3

34

► Suspend Mode

This item is used to set the energy saving mode of the ACPI function. When you select “S1
(POS)” mode, the power is always on and computer can be resumed at any time. When
you select “S3 (STR)” mode, the power will be down after a period of time. The status of the
computer before it entering STR will be saved in memory, and the computer can quickly return
to previous state when the STR function wakes.

► Resume by PCI Card

This item is used to enable/disable the PCI card to generate a wake up.

► Resume by PCIE Card

This item is used to enable/disable the PCIE card to generate a wake up.

► Resume by LAN

This item is used to enable/disable the onboard LAN to generate a wake up.

► Resume by USB Devices

This item is used to enable/disable the USB devices to generate a wake up.

► Resume by PS2 Keyboard

This item is used to enable/disable the PS2 keyboard to generate a wake up.

► Resume by PS2 Mouse

This item is used to enable/disable the PS2 mouse to generate a wake up.

► Resume by RTC 

This item is used to enable/disable RTC alarm event to generate a wake up.
RTC is system real time clock.

► Energy-using Products  

This item is used to enable/disable the EuP(Energy-using Products) feature. When enable, the

suspend power of the chipset will be cut off in S5 suspend mode in order to reduce the power 

consumption of motherboard.

Enabled: S1/S3/S4 is normal, S5 wake up only by pressing the power button.

Disabled: Normal ACPI function.

►PWRON after PWR-Fail  

This item is used to set which state the PC will take with when it resumes after an AC power 
loss.

Содержание M61PML Series






































































































Отзывы: