3
28
■ DCT channels A and B can be ganged as a single logical 128-bit DIMM.
■
Offers highest DDR3 bandwidth.
■
Requires both DIMMs in a logical pair to have identical size and timing parameters, both
DCTs programmed identically.
Unganged channels
■ DCT channels A and B operate as two completely independent 64-bit channels (both chan
-
nels operate at the same frequency).
■ Reduce DRAM page conflicts – more concurrent open dram pages .
■ Better bus efficiency.
Burst lengths supported
When both DCTs are enabled in unganged mode, BIOS must initialize the frequency of each
DCT in order.
DRAM Timing Configuration
CMOS Setup Utility - Copyright (C) 1985-2011, American Megatrends, Inc.
DRAM Timing Configuration
DRAM Timing Configuration
Help Item
Memory Clock Mode
[Auto]
DRAM Timing Mode [Auto]
Auto
Limit
Manual
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Auto]
Options
► Memory Clock Mode
This option is used to configuration Memory Frequency, Timings and Subtimings. Setting
values are :[Auto],[Limit],[Manual].
[Auto]: DRAM SPD profile1;
[Limit]: DRAM SPD profile2;
[Manual]: DRAM by Manual.
► DRAM Timing Mode
When both DCTs (DRAM controller) are enabled in unganged mode, BIOS must initialize the
frequency of each DCT in order, you also can configure the timings manually.
Settings are: [Auto], [DCT0], [DCT1], [Both].
