manualshive.com logo in svg

Foxconn M61PML Series, Руководство пользователя, Страница: 96 / 101

Поделиться
Скачать
Foxconn M61PML Series Скачать руководство пользователя страница 96

5

89

5-5 Setting Up a Non-Bootable RAID Array

This section assumes the following setup :

■  

Boot Disk with Windows XP installed :

One hard disk 

HDS728080PLAT20 (80GB) is 

connected to the SATA channel, and 

set to Master.

■  A Mirrored 

RAID Array Disk : 

Two SATA hard disks are configured as a mirrored RAID1 array, they are :
Hitachi HDT725025VLA, (232.88GB) connected to SATA port2 of the motherboard.
Segate ST3320620AS, (298.09GB) connected to SATA port4.

■  A 

SATA DVD Drive : 

A DVD drive connected to SATA port1.

1. Reboot your system, and go to "SATA Configuration" menu. 

Enable the RAID function together with the SATA ports which have the hard disks 

and DVD drive connected. Press [F10] to save the settings and reboot.

 

To achieve the best performance and reliability, we highly recommend you 

using the hard disks with the same brand, size and model number. Though 
we are using different brand of hard disks as an example here, the purpose 
is only for easy understanding.

WA

RNING!

CMOS Setup Utility - Copyright (C) 1985-2011, American Megatrends, Inc.

SATA Configuration

   SATA Configuration   

 

   

 

        Help Item

 

   OnBoard SATA Controller                 [Enabled]

 

  

        

   OnBoard SATA Mode                       

 

                                                                                                   IDE      

 

 

 

 

                                             RAID

     

 

  

    

 

 

 

   

   

    

 

 

 

   

   

    

 

 

 

   

     

   

    

 

   

    

 

 

 

   

   

   ↑↓←→:Move   Enter:Select    +/-/:Value    F10:Save    ESC:Exit     F1:General Help        

                                        F9:Optimized Defaults

[RAID]

Options

Содержание M61PML Series






































































































Отзывы:

Нет отзывов