Foxconn 915M07 series Скачать руководство пользователя страница 53

Страница: 53 / 106

Chapter 3 BIOS Description

915M07 Series User Manual

Delay Prior to Thermal (Default: 16Min)

This option is used to set the delay time before the CPU enters auto thermal

mode. The setting values are: 4 Min, 8 Min, 16 Min, 32 Min.

Thermal Management (Default: Thermal Monitor 1)

This option is used to manage Prescott CPU thermal.

TM2 Bus Ratio (Default: Depend on CPU)

Represents the frequency bus ratio of the throttled performance state that will
be initiated when the on-diesensor gose from not hot to hot.

TM2 Bus VID (Default: Depend on CPU)

Represents the voltage of the throttled performance state that will be initi -
ated when the on-diesensor gose from not hot to hot.

Limit CPUID MaxVal (Default: Disabled)

The option is used to set limit CPUID MaxVal. The available setting values are:
Disabled and Enabled.

NX BIOS Control (Default: Depend on CPU)

When disabled, forces the NX feature flag to always return 0. The available

setting values are: Disabled and Enabled.

CPU Feature Menu

Содержание 915M07 series











































































































Результаты поиска

Содержание 915M07 series

Отзывы:

Похожие инструкции для 915M07 series

Бренды по названию

Популярные бренды

Foxconn 915M07 series, Руководство пользователя

Результаты поиска

Содержание 915M07 series

Отзывы:

Похожие инструкции для 915M07 series

Бренды по названию

Популярные бренды