Foxconn 915M07 series Скачать руководство пользователя страница 26

Страница: 26 / 106

Chapter 2 Installation Instructions

915M07 Series User Manual

VGA Port (only for I915 G/GV)

The VGA Port is for output to a VGA-compatible device.

1394 Port (optional)

This digital interface supports electronic devices such as digital cameras,

scanners, and printers.

USB 2.0 Ports

These four Universal Serial Bus (USB) ports are available for connecting USB

2.0/1.1 devices.

LAN Port (-L/-K) (optional)

This port allows connection to a Local Area Network (LAN) through a network hub.

Line in, Line out, Microphone Jacks (for -6 models)

When using a 2-channel sound source, the Line out jack is used to connect to

speaker or headphone; the Line in jack connects to an external CD player, tape

player or other audio device. The Microphone jack is used to connect to the

microphone.

When using a 6-channel sound source, connect the front speaker to the green

audio output; connect the surround sound speaker to the blue audio input;

connect the center speaker/subwoofer to the red Microphone input.

Line in, Line out, Microphone, Rear, LEF/CEN, Side Jacks (for -8 models)

When using an 8-channel sound source, connect the front speaker to the green

audio output; connect the rear sound speaker to the black audio input; connect

the center speaker/subwoofer to the orange audio input; connect the side sound

speaker to the grey audio input.

Содержание 915M07 series











































































































Результаты поиска

Содержание 915M07 series

Отзывы:

Похожие инструкции для 915M07 series

Бренды по названию

Популярные бренды

Foxconn 915M07 series, Руководство пользователя

Результаты поиска

Содержание 915M07 series

Отзывы:

Похожие инструкции для 915M07 series

Бренды по названию

Популярные бренды