Foxconn 875A02 Скачать руководство пользователя страница 61

Страница: 61 / 117

Chapter 3 BIOS Description

875A02 User Manual

Video BIOS Cacheable (Default: Disabled)

This option is used to determine whether the Video BIOS is written into the
buffer memory. The available setting values are: Disabled and Enabled.

Memory Hole At 15M-16M (Default: Disabled)

This option is used to determine whether the 15M-16M address field of
memory is reserved for the ISA expansion card. The available setting values
are: Disabled and Enabled.

AGP Aperture Size (MB) (Default: 128)

This option is used to set up the memory size occupied by AGP card.
Note: This function does not work when Onboard VGA is used.

Init Display First (Default: AGP)

This option is used to set which display device will be used first when your PC
starts up. The available setting values are: AGP and PCI Slot.

DRAM Data Integrity Mode (Default: ECC)

This option is used to set the DRAM data integrity mode. The available setting
values are: ECC and Non-ECC.

Fast Chip Select (Default: Auto)

This option allows you to set the Intel

PAT function, select “Enabled” for the

Intel

PAT function is OK. The available setting values are: Auto and Enabled.

Содержание 875A02






















































































































Результаты поиска

Содержание 875A02

Отзывы:

Foxconn 875A02, Руководство пользователя, Страница: 61 / 117

Результаты поиска

Содержание 875A02

Отзывы: