Chapter 1 Product Introduction
6
600A01 Series User Manual
Super I/O controller
The VIA VT1211 I/O controller offers support for a variety of I/O function.
Provides a high-performance floppy disk controller for a 360K/720K/1.44M/
2.88M floppy disk drive, a multi-mode parallel port, two serial ports, and
a Flash ROM interface.
ATX power connector
This 20-pin connector connects to an ATX power supply. The power supply
must have at least 1A on the +5V standby lead (+5VSB).
AGP slot
This Accelerated Graphics Port (AGP) slot supports 1.5V AGP 8X/4X mode
graphics cards for 3D graphical applications.
CPU socket
Socket 462 (socket A)
Zero Insertion Force (ZIF) for the AMD processor,
with 200/266/333/400MHz system bus.
North Bridge controller
The VIA KT600 controller integrates a high performance host interface for
the AMD processor, a DDR memory controller, and support AGP 8X
technology.
DDR DIMM sockets
These three 184-pin DIMM sockets support up to 3GB system memory
using unbuffered non-ECC PC2100/PC2700/PC3200 DDR DIMMs.
South Bridge controller
The VIA VT8237 integrated peripheral South Bridge controller communicates
with the North Bridge at the rates of up to 533MB/s using the VIA 8X VLink
technology. This controller supports standard UltraATA 133/100/66/33 and
provides separate data paths for each IDE channel for up to two IDE devices.
This controller also integrates SATA RAID controller, Ethernet MAC, Universal
Serial Bus Host controller.
Serial ATA connectors (optional)
These connectors support Serial ATA HDDs and allow for up to 150MB/s
data transfer rate, faster than the standard Parallel ATA with 133MB/s.
3
4
1
2
5
6
7
8
600A01-FOXCONN-V1.0-HW-en.p65
2004-4-12, 13:29
6
