background image

Chapter 3     BIOS Description

39

600A01 Series User Manual

BIOS Features

[SuperBoot] SuperBoot (Default: Disabled)

SuperBoot allows system-relevant information to be stored in CMOS upon the
first normal start-up of your PC, and the relevant parameters will be restored
to help the system start up more quickly on each subsequent start-up. The
available setting values are: Disabled and Enabled.

[SuperBIOS-Protect] SuperBIOS-Protect (Default: Disabled)

SuperBIOS-Protect function protects your PC from being affected by viruses,
e.g. CIH. The available setting values are: Disabled and Enabled.

[SuperRecovery] SuperRecovery Hotkey (Default: F12)

SuperRecovery provides the users with an excellent data protection and HDD
recovery function. There are 12 optional hotkey and the default hotkey is
F12.

[SuperSpeed] CPU Clock (Depending on the specification of the CPU)

The conventional over-clock method uses the jumpers on the motherboard,
and it is both troublesome and apt to errors. By using SuperSpeed, a CPU
can be overclocked by keying in the desired in the CPU clock range.

Warning:

Be sure your selection is right. CPU overclock will be dangerous!
We will not be responsible for any damage caused.

BIOS Features Menu

600A01-FOXCONN-V1.0-BIOS-en.p65

2004-4-12, 13:31

39

Содержание 600A01 series


























































































































Отзывы: