Fourier MultiLab, Руководство пользователя

Страница: 60 / 149

Chapter 2 MultiLab Software 51
2.4.4. Meters
MultiLab enables you to view data in meters format on the screen (one meter for
each sensor), with up to four meters showing at once. The meters can display live
data while MultiLab is recording, or saved data when a saved file is replayed.
When a cursor is displayed, the meter shows the measured values that correspond
to the time of the point at which the cursor is positioned.
There are three meter types: analog, bar and digital. The meter
’
s scaling
automatically matches the graph
’
s scaling.
To set up the meters:
1. Click Meter Setup on the main toolbar:
2. Select the meter type, and the data set to be displayed.
3. A list entry that begins with a graph number denotes a displayed
data set. A list entry that begins with an input number denotes the
next recording, and will be displayed on the meter the next time you
start a recording.
4. Repeat this procedure for up to four meters.
5. To remove the meters click Meter Setup , and click Remove
all .
2.4.5. Data Map
Click Data Map to display or remove the Data Map.
The data map is a separate window that displays the list of data sets that were
recorded or downloaded in the current session, as well as the lists of all the saved
graphs and tables. Use the Data Map to navigate through the available data sets and
to keep track of the data that is displayed in the graph window.
1. Control the Display with the Data Map
The items in the Data Map are sorted into three main categories:
•
Data sets (including analysis functions)
• Saved graphs
• Saved tables
Double click on a category to bring up the full list. Double click a second time to
collapse the list. You can also use the plus (+) and minus (-) signs next to the icons
to expand or collapse the categories.
The Data sets list expands to sub-categories of experiments and functions. To
display the complete list of measurements, or the complete list of analysis functions
performed on the measurements for any individual experiment, double click the
experiment’s icon or click the plus sign (+) next to it.
To collapse a list under an individual experiment, double click the experiment’s icon
or click the minus sign (-) next to it.
To display a data set or a saved graph in the graph window, or to display a table in
the table window, double click its icon. Double click a second time to remove it.